# changelog

author: Sean Dague <sean@dague.net> 1.52-4
changelog:
  - Fixed so rpm can be built without modifying source tarball
  - Added Obsoletes tag so that it replaces libappconfig-perl properly


author: anicka@suse.cz
changelog:
  - update to 2.29
    * Fixed errors that occurred when encrypting/decrypting utf8
    strings in Perl's more recent than 5.8.8.


author: chris@computersalat.de
changelog:
  - remove Author from desc
  - added bcond_with opt
    o test optional pkgs via local build (osc build --with opt)
  - fix deps for CentOS
  - some spec cleanup


author: coolo@suse.com
changelog:
  - updated to 2.32
    - Fixes "Taint checks are turned on and your key is tainted" error when autogenerating salt and IV.
    - Fixes to regular expressions to avoid rare failures to
      correctly strip padding in decoded messages.
    - Add padding type = "none".
    - Both fixes contributed by Bas van Sisseren.


author: coolo@suse.com
changelog:
  - updated to 6.01
    Don't pick up label text from textarea [RT#72925]
    Restore perl-5.8.1 compatiblity.


author: coolo@suse.com
changelog:
  - updated to 6.03
    Support the new HTML5 input types without warning
    Fix test failure when HTTP-Message 6.03 (or better) was installed [RT#75155]


author: H. Peter Anvin <hpa@zytor.com>
changelog:
  - Add a syslinux-tftpboot module.
  - Factor extlinux into its own package.
  - Move to /usr/share (/usr/share).


author: Bernard Li <bernard@vanhpc.org>
changelog:
  - Added netpbm-progs (provides pngtopnm) to BuildPrereq (this should be
    changed to BuildRequires since it is deprecated...)


author: Sean Dague <sean@dague.net> 2.2.2-1
changelog:
  - add Erich Focht's kernel version detector changes
  - update hardware detection module to FC3 & Mandrake 10.1 based lists


author: Erich Focht <efocht@hpce.nec.com>
changelog:
  - first step in merging with changes from the OSCAR tree
  - changes correspond to systemconfigurator distributed with OSCAR 4.2


author: Erich Focht
changelog:
  - Patches to bring systemconfigurator to the level of the version included
    into OSCAR 5.0 (sc-2.2.7-12ef). In order to avoid confusion, updating the
    version number to 2.2.8-1. Changes are listed below:
    * Wed Oct 25 2006 Erich Focht]
    - fixing issue with unknown additional scsi device (oscar bug #274).
    * Fri Sep 15 2006 Erich Focht
    - locating "env" with "which". Path to env is different in SuSE and RedHat.
    * Wed Aug 23 2006 Erich Focht
    - added check for --no-floppy support of grub (RHEL3 doesn't support it)
    - made functions in Grub.pm more OO. Needed for storing "nofloppy" capability
      centrally, in the object instance.
    * Mon Aug 07 2006 Erich Focht
    - added --no-floppy to grub calls as suggested by Andrea Righi.
    * Mon Jul 17 2006 Erich Focht
    - added <HOSTID>, <HOSTID+nnn> and <HOSTID-nnn> hostname dependent
      variable replacement (in the global APPEND block of the BOOT section).


author: Erich Focht
changelog:
  - Added scconf-tool, a tool for querying and manipulating the 
    /etc/systemconfig/systemconfig.conf file from shell scripts. 
  - Added scconf-bootinfo, a helper tool for detecting boot information.
    Used by the kexec boot method of systemimager.


author: Erich Focht
changelog:
  - Added debian support which was in the OSCAR pkgsrc repository, provided
    by Geoffroy Vallee. Also added an extension of the syntax for supporting
    xen virtual machines.


author: Olivier Lahaye <olivier.lahaye@cea.fr>
changelog:
  - New svn snapshot 4568
  - device-mapper-devel is needed
  - quilt is needed for building sysvinit-2.87dsf
  - Patch to sysvinit-2.87dsf to avoid debian specific stuffs
  - Patch for new kernel config


author: Olivier Lahaye <olivier.lahaye@cea.fr> 4.2.0-0.5svn4568
changelog:
  - Fixed initrd_source/make.d/{udev,coreutils,util-linux}.rul
    using make install-exec so libtool is used to install binaries
    and thus avoiding copying the libtool wrapper instead of the
    real binaries.
  - Added "BuildRequires: gperf" for udev build


author: Olivier Lahaye <olivier.lahaye@cea.fr> 4.2.0-0.8svn4568
changelog:
  - Full rewrite of 95all.monitord_rebooted to have correct rebooted status
    on RHEL like distros. Try to comply with SysVInitScripts and systemd.


author: Olivier Lahaye <olivier.lahaye@cea.fr> 4.2.0-0.91svn4568
changelog:
  - Forgoti to apply the patch below.
  - Enabled ext4 module in kernel
  - Updated systemimager_server_pm.patch (use $(()) for arithmetics)


author: Olivier Lahaye <olivier.lahaye@cea.fr> 4.3.0-0.1
changelog:
  - Commited all patches into SVN.
  - Removed all spec patches
  - included systemimager-FixDebianOnly.tar.bz2 inside the archive so
    the rpm can be created with the "rpmbuild -tb" command.
  - New devel branch 4.3.0
  - Add optional .el6 tag to the release


author: <duncan@iceblink.org> 1.8.6-1
changelog:
  - Fix memory corruption when sending encrypted SOL traffic
   - Add keepalive timer to IPMIv2 SOL sessions


author: <duncan@iceblink.org> 1.8.7-1
changelog:
  - Add Sun OEM command for blades
   - Increase argument size for raw commands in shell/exec
   - Fix handling of LUNs for LAN interfaces
   - Add IPMIv2 SOL loopback test
   - Add support for IBM OEM SEL messages
   - Disable file paranoia checks on read files by default
   - Support IPMIv2 SOL on older Intel boxes
   - Display message and exit if keepalive fails during SOL
   - Add support for setting VLAN id and priority
   - Add support for FreeBSD OpenIPMI-compatible driver
   - Add support for IPMIv2 Firmware Firewall
   - Fix gcc4 compile warnings
   - Make ipmievd generate pidfile
   - Add initscripts for ipmievd


author: <duncan@iceblink.org> 1.8.8-1
changelog:
  - Fix segfaults in sensor data repository list
   - Fix ipmievd to open interface before daemonizing
   - Fix IPMIv1.5 authtype NONE to ignore supplied password
   - Fix cipher suite display bug in lan print
   - Fix typo in IPMIv2 SOL output when sending break
   - Fix improper LUN handling with Tyan SOL
   - Add LUN support to OpenIPMI interface
   - Add support for Kontron OEM commands
   - Update to Kontron Firmware Update command


author: <pere@hungry.com> 1.8.9-1
changelog:
  - Added initial AMC ekey query operation support
   - Improvements to ekeying support (PICMG 3.x only)
   - Added initial interactive edition support for multirec; added IANA
     verification before interpreting PICMG records.
   - Added edit support for AMC activation "Maximum Internal Current"
   - Fix bug generating garbage on the screen when handling GetDeviceId
     and sol traffic occurs
   - Added ability to map OEM sensor types to OEM description string using 
     IANA number; moved IANA number table
   - Fix lan set access command to use value already saved within parameters 
     for PEF and authentication
   - Fix bug in cmd ipmitool lan stats get 1
   - Add support to allow ipmitool/ipmievd to target specific device nodes 
     on multi-BMC systems
   - Add support for name+privilege lookup for lanplus sessions
   - Fix time_t conversion bug for 64-bit OS
   - Added prefix of hostname on sel ipmievd sessions
   - Fixed FWUM Get Info
   - Fix ipmievd fd closing bug
   - Add set-in-progress flag support to chassis bootdev
   - Added new chassis bootdev options
   - Add sol payload enable/disable comman
   - Fix SOL set errors when commit-write not supported
   - Fix reset of session timeout for lanplus interface
   - Fixed lan interface accessibility timeout handling
   - Fix bug with Function Get Channel Cipher Suites command when more 
     than 1 page used.
   - Fix missing firmware firewall top-level command
   - Fix bug in SOL keepalive functionality
   - Fix SOLv2 NACK and retry handling for Intel ESB2 BMC
   - Added ipmi_sel_get_oem_sensor* APIs
   - Added HPM.1 support 
   - Fix segfault when incorrect oem option supplied
   - Fix bus problem with spd command
   - Fix segfault in SOL when remote BMC does not return packet
   - Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes
   - Added lan packet size reduction mechanism
   - Fix bug with sendMessage of bad length with different target
   - Fix for big endian (PPC) architecture
   - NetBSD fixes
   - Fix segfault and channel problem with user priv command
   - Add support for bus/chan on i2c raw command
   - Add freeipmi interface support
   - Add remote spd printing
   - Add better detection of linux/compiler.h to config
   - Makefile changes to fix makedistcheck, etc.


author: <pere@hungry.com> 1.8.10-1
changelog:
  - Added support for BULL IANA number.
   - Fixed contrib build so the oem_ibm_sel_map file gets included in rpm 
     builds again.
   - Added support for Debian packages to be built from CVS
   - Fix for sdr and sel timestamp reporting issues
   - Fix for discrete sensor state print routines to address state bits 8-14
   - Change ipmi_chassis_status() to non-static so it can be used externally
   - Added retries to SOL keepalive
   - Fix to stop sensor list command from reporting a failure due to missing 
     sensor
   - Fix bug in sdr free space reporting
   - Add support for IANA number to vendor name conversion for many vendors
   - Fix segfault bug in lan set command
   - Fix bug in population of raw i2c wdata buffer
   - Fix bug in ipmb sensor reading
   - Fix misspellings, typos, incorrect strncmp lengths, white space
   - Update/fix printed help and usages for many commands
   - Add and update support for all commands in ipmitool man page
   - Fix for lanplus session re-open when the target becomes unavailable following
     a fw upgrade activation
   - Add support for watchdog timer shutoff, reset, and get info
   - Add support for more ibm systems in oem_ibm_sel_map
   - Add more JEDEC support info for DIMMs; decrease request size for DIMM FRU
     info to 16 bytes at a time to allow more DIMM FRUs to respond.
   - Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg buffer 
     length more aggressively when no response from iol
   - Fix HPM firmware activation via IOL; fake a timeout after IOL session 
     re-open to force get upgrade status retry; Added retries on 0xD3 
     completion code
   - Add support for freeipmi 0.6.0; adjust autoconf for changes
   - Fix for oemval2str size
   - Add support for product name resolution in mc info
   - Fix FRU display format
   - Added PICMG ekeying analyzer module support (ekanalyzer); display point
     to point physical connectivity and power supply information between 
     carriers and AMC modules; display matched results of ekeying match 
     between an on-carrier device and AMC module or between 2 AMC modules
   - Fix AMC GUID display support
   - Improved amcportstate operations
   - Added resolution for new sensor types
   - Fix segfault in SOL
   - Fix bug that caused infinite loop on BMCs with empty SDRs
   - Fix to move out Kontron OEM sensor resolution for other OEMs which could 
     lead to bad event descriptions
   - Add new FRU edit mode thereby allowing serial numbers, etc. to be changed;
      improvements to OEM edit mode
   - Added SPD support for parms: channel number, max read size
   - Add SDR support for adding SDR records from a dumped file, clearing SDR, 
     adding partial SDR records
   - Add updates and fixes to hpmfwupg: upload block size to 32 bytes for KCS,
     handle long response option, implement rollback override, garbage output fix
   - Add double bridge lan support , fix bridging issue
   - Add HPM support to pre-check which components need to be skipped
   - Fix autodetection of maximum packet size when using IPMB
   - Add new Kontron OEM command to set the BIOS boot option sequence
   - Add support for dual-bridge/ dual send message
   - Add auto-detect for local IPMB address using PICMG 2.X extension
   - Add support for HPM.1 1.0 specification compliance
   - Fix for improper lan/lanplus addressing
   - Added transit_channel and transit_addr to ipmi_intf struct
   - Fix bad password assertion bug due to rakp2 HMAC not being checked properly
   - Added ability to interpret PPS shelf manager clia sel dump
   - Corrected PICMG M7 state event definition macros
   - Added FRU parsing enhancements
   - Added "isol info", "isol set" and "isol activate" commands to support 
     Intel IPMI v1.5 SOL functionality. Removed "isol setup" command.
   - Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces.
   - Fix bug in "chassis poh" command.
   - Fix HPM.1 upgrade to apply to only given component when instructed to do so
   - Added configure auto-detection if dual bridge extension is supported 
     by OpenIPMI


author: <pere@hungry.com> 1.8.11-1
changelog:
  - Fix new GCC compilation issues in regards to Packing
  - Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded
    for 2.4 kernel instead of ipmi_si_drv driver module
  - New -y option added to allow specification of kg keys with
    non-printable characters
  - New -K option added to allow kgkey settings via environmental
    variable IPMI_KGKEY
  - Generic device support added for EEPROM with SDR Type 10h (gendev)
  - Fix to lan-bridging for a double-bridging crash and to fix
    an issue with bridging multiple concurrent requests and
    erroneous handling of raw Send Message
  - Lanplus fix for commands like 'sensor list' without the -t option
    causing wrong double bridged requests of a sensor is located
    on another satellite controller
  - Fix lan and lanplus request list entry removal bugs
  - Fix non-working issue when trying to send a bridge message with
    Cipher 3
  - Change bridge message handling to reuse command ipmi_lan_poll_recv
  - Added PICMG 2.0 and 2.3 support
  - Fix PICMG (ATCA) extension verification and reversal of BCD encoded
    values for "major" and "minor" fields
  - Add IANA support for Pigeon Point
  - Add OEM SW/FW Record identification
  - Fix to include I2C and LUN addresses so sensors are correctly managed
  - Patch ID 1990560 to get readings from non-linear analog sensors
  - Add support for SOL payload status command
  - SOL set parameter range checking added
  - Fixed SOL activate options usage 
  - Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967)
  - Added retries to SOL keepalive
  - Fixed wrong mask values for Front Panel disable/enable status
  - Add support to access fru internal use area
  - Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow
    blocks of data within the FRU storage area to be write protected.
  - Fix node reporting in GUID; Tracker bug #2339675
  - Fix watchdog use/action print strings
  - Fix endian bug in SDR add from file; Tracker bug #2075258
  - Fix crash when dumping SDRs in a file and there's an error
    getting an SDR; improve algorithm for optimal packet size
  - Fix occasional SDR dump segfault; #1793076
  - Allow ipmitool sel delete to accept hex list entry numbers
  - Fix SEL total space reporting.
  - Fix for garbage sensor threshold values reported when none 
    returned.  Tracker Bug #863748
  - ipmievd change to Monitor %used in SEL buffer and log warnings when
    the buffer is 80% and 100% full


author: <chenglch@cn.ibm.com> 1.8.17-1
changelog:
  Make ipmitool exit gracefully when receiving `INT`, `TERM` or `HUP` signal.
    Close the intf(lanplus) session when the sol session at BMC side is closed.


author: anicka@suse.cz
changelog:
  - update to 2.12
    * updated Changes to mesh with revision.
    * patched _blowfish.c to stop spurious warnings.
    * updated POD
  - remove the patch (fixed in upstream)


author: chris@computersalat.de
changelog:
  - recreated by cpanspec 1.78
    o fix deps
  - removed old Obsoletes/Provides perl_bf
  - removed old Conflicts perl_cpx perl-Cryptix


author: coolo@suse.com
changelog:
  - updated to 2.14
    - quick mod to keep META.yml current
    - updated SvUPGRADE to a statement
    - patched for WIN64
  - obsoletes svupgrade.patch


author: coolo@suse.com
changelog:
  - update to 2.18.1
    - Fix LANG testing issue [GSM] (CPAN bug #56705)
    - Fix bug when async commands issued immediately after a COPY.
      [GSM] (CPAN bug #68041)


author: darin@darins.net
changelog:
  - update to 2.19.3
    - Fix bug in pg_st_split_statement causing segfaults
      (CPAN bug #79035)
    - See Changes for 2.19.0 - 2.19.2 changes


author: stephan.barth@suse.com
changelog:
  - update from version 2.19.3 to 3.0.0
    These are the most important changes from upstream:
    - Major change in UTF-8 handling
    - Better handling of libpq errors to return SQLSTATE 08000
    - Add support for AutoInactiveDestroy
    and many bugfixes. See the Changes file for a full list of changes.


author: stephan.barth@suse.com
changelog:
  - update to version 3.1.1 from 3.0.0
    Changes from upstream:
    Version 3.1.1  Released April 6, 2014
    - Minor adjustments so tests pass in varying locales.
    Version 3.1.0  Released April 4, 2014
    - Make sure UTF-8 enabled notifications are handled correctly
      [Greg Sabino Mullane]
    - Allow "WITH" and "VALUES" as valid words starting a DML statement
      [Greg Sabino Mullane] (CPAN bug #92724)


author: stephan.barth@suse.com
changelog:
  - update to version 3.2.0 from 3.1.1
    Changes from upstream:
    - Add new attribute pg_placeholder_nocolons to turn off all parsing of
      colons into placeholders.
      [Graham Ollis] (CPAN bug #95173)
    - Fix incorrect skip count for HandleSetErr
      [Greg Sabino Mullane] (CPAN bug #94841)
    - Don't attempt to use the POSIX signalling stuff if the OS is Win
      [Greg Sabino Mullane] (CPAN bug ##94841)
    - Fix missing check for PGINITDB in the test suite.
      [Nicholas Clark]


author: stephan.barth@suse.com
changelog:
  - update to version 3.2.1 from 3.2.0
    Changes from upstream:
    - Stricter testing for array slices: disallow number-colon-number from
      being parsed as a placeholder.
      [Greg Sabino Mullane] (CPAN bug #95713)
    - Fix for small leak with AutoInactiveDestroy
      [David Dick] (CPAN bug #95505)
    - Adjust test regex to fix failing t/01_connect.t on some platforms
      [Greg Sabino Mullane]
    - Further tweaks to get PGINITDB working for test suite.
      [Nicholas Clark]


author: stephan.barth@suse.com
changelog:
  - update to version 3.3.0 from 3.2.1
    Upstream changes:
    - Major cleanup of UTF-8 support
    - Rewrite foreign_key_info to be just one query
    - Remove ODBC support from foreign_key_info
    - Remove use of dTHX in functions in quote.c and types.c


author: stephan.barth@suse.com
changelog:
  - update to version 3.4.0 from 3.3.0
    Upstream changes:
    - Cleanup and improve table_info()
      table_info() type searching now supports TABLE, VIEW, SYSTEM TABLE,
      SYSTEM VIEW, and LOCAL TEMPORARY
      table_info() object searching fully supports the above types.
      table_info() object searching no longer ignores invalid types - a filter
      of 'NOSUCH' will return no rows, and 'NOSUCH,LOCAL TEMPORARY' will
      return only temp objects.
      tableinfo() type filters are strictly matched now ... previously a
      search for SYSTEM TABLE would have fetched plain TABLE objects.
      table_info() now treats temporary tables and temporary views as LOCAL
      TEMPORARY
    - Make sure column_info() and table_info() can handle materialized views.


author: stephan.barth@suse.com
changelog:
  - Update to version 3.4.1 from 3.4.0
    Change from upstream:
    - Allow '%' again for the type in table_info() and thus tables()
      It's not documented or tested in DBI, but it used to work until
      DBD::Pg 3.4.0, and the change broke DBIx::Class::Schema::Loader, which
      uses type='%'.


