[xcat-user] mm in bay 2 instead of bay 1?

[Egan Ford]

I see a lot of mm[1] hardcoded in blade.pm when clearly you need mm[2].

This should be configurable.  But for now, is there any reason why you
cannot move it to bay 1?

> -----Original Message-----
> From: xcat-user-bounces at lists.xcat.org 
> [mailto:xcat-user-bounces at lists.xcat.org] On Behalf Of John 
> Griffin-Wiesner
> Sent: Tuesday, September 09, 2008 3:30 PM
> To: xCAT Users Mailing list
> Subject: [xcat-user] mm in bay 2 instead of bay 1?
> Importance: High
> 
> 
> Hello.
> 
> I've got snmp and ssh from my xcat 2 management node working 
> on all of my bladecenter amm's except for one.  For some 
> reason, on just that one chassis the AMM is in bay 2 instead 
> of bay 1 as on all the others.
> 
> And on that AMM I am unable to get the connection working 
> correctly from utils such as rspconfig, even though I've gone 
> over all the configs via the web interface.
> 
> [root at bcx xcat]# rspconfig bc12 snmpcfg=enable sshcfg=enable
> bc12: Cannot find user: 'USERID' on MM
> bc12: SSH supported on AMM with minimum firmware BPET32
> 
> [root at bcx xcat]# rspconfig bc12 snmpcfg sshcfg
> bc12: SSH supported on AMM with minimum firmware BPET32
> bc12: SNMP: disabled
> 
> I can telnet/ssh into the mm as normal.  And I upgraded to 
> the latest amm firmware to no avail.  The bay 2 vs bay 1 is 
> the only thing I can find that's different in this amm's 
> config.  But I can't find where that could be set in the xcat 
> tables.  Is this in the tables somewhere?
> 
> 
> 
> Here's sshcfg and snmp config as shown when ssh'd into bc12:
> 
> system:mm[2]> info
> 
> Name: bc12
> Manufacturer: IBM (ASUS)
> Manufacturer ID: 20301
> Product ID: 65
> Mach type/model: Advanced Management Module
> Mach serial number: Not Available
> Manuf date: 20/06
> Hardware rev: 4
> Part no.: 39Y9659
> FRU no.: 39Y9661
> FRU serial no.: YK118165A141
> CLEI: Not Available
> AMM firmware
>         Build ID:       BPET36M
>         File name:      CNETCMUS.PKT
>         Rel date:       07-02-08
>         Rev:            36
> 
> 
> system:mm[2]> sshcfg
> -v1 off
> -cstatus enabled
> CLI SSH port 22
> -sstatus enabled
> SMASH SSH port 50022
> ssh-dss 2048 bit fingerprint: 
> 63:42:64:14:df:ec:14:18:73:56:0c:59:f8:60:6b:e1
> ssh-rsa 2048 bit fingerprint: 
> db:c4:4d:e8:e1:00:0b:78:20:67:22:1b:e4:b9:73:9a
> 0 SSH public keys installed
> 12 locations available to store SSH public keys
> system:mm[2]> snmp
> -a Enabled
> -a3 Enabled
> -t Enabled
> -l No Location Configured
> -cn No Contact Configured
> -c1 public
> -c1i1 0.0.0.0
> -c1i2 
> -c1i3 
> -ca1 get
> -c2 private
> -c2i1 0.0.0.0
> -c2i2 
> -c2i3 
> -ca2 get
> -c3 
> -c3i1 
> -c3i2 
> -c3i3 
> -ca3 get
> 
> 
> 
> -- 
> John Griffin-Wiesner
> Linux Cluster/Unix Systems Administrator
> Univ. MN Supercomputing Institute
> http://www.msi.umn.edu
> johngw at msi.umn.edu _______________________________________________
> xcat-user mailing list
> xcat-user at lists.xcat.org 
> http://www.xcat.org/mailman/listinfo/xcat-user