[xcat-user] I wonder how to define and use CEC in xCAT...

[Min Jun,Xi]

Thank you, Scot.

On Thu, Oct 16, 2008 at 9:48 PM, Scot Sakolish <sakolish at us.ibm.com> wrote:
>
> If you run "rscan" on an HMC (which has been defined in the xCAT database as
> a node), the command will display the hardware hierarchy - HMC cv3hmc03
>  managing CEC (a.k.a FSP) Server-9133-55A-SN10B7D3G, with LPARs
> Ve96m5sq01_RH and VIOS_e96m5ms01 associated with that CEC.
> Running "rscan cv3hmc03 -w"  will put the CECs and LPARs in the xCAT
> database so then you can run "rpower", "lsvm", etc. on those CECs and LPARs.
>
> ~ # rscan cv3hmc03
> type    name                                       id
>  type-model          serial-number          address
> hmc    cv3hmc03                                      7310CR2
> 105369A                cv3hmc03
> fsp     Server-9133-55A-SN10B7D3G          9133-55A            10B7D3G
>
> lpar    Ve96m5sq01_RH                      2               9133-55A
>    10B7D3G
> lpar    VIOS_e96m5ms01                     1               9133-55A
>    10B7D3G
>
>
> ~ # lsvm Server-9133-55A-SN10B7D3G
> Server-9133-55A-SN10B7D3G:
> name=Ve96m5sq01_rh_profile,lpar_name=Ve96m5sq01_RH,lpar_id=2,lpar_env=aixlinux,all_resources=0,min_me
> m=2048,desired_mem=2048,max_mem=2048,proc_mode=shared,min_proc_units=0.5,desired_proc_units=0.5,max_proc_units=0.5,min_procs=1,d
> esired_procs=1,max_procs=1,sharing_mode=cap,uncap_weight=0,io_slots=none,lpar_io_pool_ids=none,max_virtual_slots=10,"virtual_ser
> ial_adapters=1/server/1/any//any/1,0/server/1/any//any/1",virtual_scsi_adapters=4/client/1/VIOS_e96m5ms01/4/1,"virtual_eth_adapt
> ers=3/0/2//0/1,2/0/1//0/1",hca_adapters=none,boot_mode=norm,conn_monitoring=0,auto_start=0,power_ctrl_lpar_ids=none,work_group_i
> d=none,redundant_err_path_reporting=0
>
> name=VIOserverp,lpar_name=VIOS_e96m5ms01,lpar_id=1,lpar_env=vioserver,all_resources=0,min_mem=2048,desired_mem=2048,max_mem=2048
> ,proc_mode=ded,min_procs=1,desired_procs=1,max_procs=1,sharing_mode=share_idle_procs,"io_slots=21010003/none/1,21010002/none/1,2
> 1040004/none/1,21030003/none/1,21020003/none/1,21020004/none/1,21030004/none/1,21040003/none/1,21010004/none/1",lpar_io_pool_ids
> =none,max_virtual_slots=10,"virtual_serial_adapters=1/server/1/any//any/1,0/server/1/any//any/1","virtual_scsi_adapters=7/server
> /5//3/1,6/server/4/xcatlpar1/3/1,5/server/3/xcatlpar0/3/1,4/server/2/Ve96m5sq01_RH/4/1","virtual_eth_adapters=3/0/2//1/1,2/0/1//
> 1/1",hca_adapters=none,boot_mode=norm,conn_monitoring=0,auto_start=0,power_ctrl_lpar_ids=none,work_group_id=0,redundant_err_path
> _reporting=0
>
>
> ~ # rpower Server-9133-55A-SN10B7D3G stat
> Server-9133-55A-SN10B7D3G: Operating
>
>
> Scot Sakolish
> IBM Poughkeepsie UNIX Development Lab
> 2455 South Road
> Poughkeepsie, NY  12601-5400
> sakolish at us.ibm.com
> (845)433-3165  TIE 293-3165
>
> _______________________________________________
> xcat-user mailing list
> xcat-user at lists.xcat.org
> http://www.xcat.org/mailman/listinfo/xcat-user
>
>



-- 

best regards,
xCAT Development Team Member in CDL,IBM
Xi Minjun
Notes ID: Min Jun Xi/China/IBM/